GitBucket
Newer
/**
* Cesium - https://github.com/CesiumGS/cesium
*
* Copyright 2011-2020 Cesium Contributors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* Columbus View (Pat. Pend.)
*
* Portions licensed separately.
* See https://github.com/CesiumGS/cesium/blob/master/LICENSE.md for full licensing details.
*/
define(['exports', './when-8d13db60', './Check-70bec281', './Math-61ede240', './Cartographic-f2a06374', './Cartesian2-16a61632', './BoundingSphere-d018a565', './IntersectionTests-813bb943', './Plane-aa6c3ce5', './EllipsoidRhumbLine-87f26cac', './EllipsoidGeodesic-9ef071e0'], function (exports, when, Check, _Math, Cartographic, Cartesian2, BoundingSphere, IntersectionTests, Plane, EllipsoidRhumbLine, EllipsoidGeodesic) { 'use strict';
/**
* @private
*/
var PolylinePipeline = {};
PolylinePipeline.numberOfPoints = function(p0, p1, minDistance) {
var distance = Cartographic.Cartesian3.distance(p0, p1);
return Math.ceil(distance / minDistance);
};
PolylinePipeline.numberOfPointsRhumbLine = function(p0, p1, granularity) {
var radiansDistanceSquared = Math.pow((p0.longitude - p1.longitude), 2) + Math.pow((p0.latitude - p1.latitude), 2);
return Math.ceil(Math.sqrt(radiansDistanceSquared / (granularity * granularity)));
};
var cartoScratch = new Cartographic.Cartographic();
PolylinePipeline.extractHeights = function(positions, ellipsoid) {
var length = positions.length;
var heights = new Array(length);
for (var i = 0; i < length; i++) {
var p = positions[i];
heights[i] = ellipsoid.cartesianToCartographic(p, cartoScratch).height;
}
return heights;
};
var wrapLongitudeInversMatrix = new BoundingSphere.Matrix4();
var wrapLongitudeOrigin = new Cartographic.Cartesian3();
var wrapLongitudeXZNormal = new Cartographic.Cartesian3();
var wrapLongitudeXZPlane = new Plane.Plane(Cartographic.Cartesian3.UNIT_X, 0.0);
var wrapLongitudeYZNormal = new Cartographic.Cartesian3();
var wrapLongitudeYZPlane = new Plane.Plane(Cartographic.Cartesian3.UNIT_X, 0.0);
var wrapLongitudeIntersection = new Cartographic.Cartesian3();
var wrapLongitudeOffset = new Cartographic.Cartesian3();
var subdivideHeightsScratchArray = [];
function subdivideHeights(numPoints, h0, h1) {
var heights = subdivideHeightsScratchArray;
heights.length = numPoints;
var i;
if (h0 === h1) {
for (i = 0; i < numPoints; i++) {
heights[i] = h0;
}
return heights;
}
var dHeight = h1 - h0;
var heightPerVertex = dHeight / numPoints;
for (i = 0; i < numPoints; i++) {
var h = h0 + i*heightPerVertex;
heights[i] = h;
}
return heights;
}
function subdivideHeightsBySin(numPoints, hMax) {
var heights = subdivideHeightsScratchArray;
heights.length = numPoints;
for (var i = 0; i < numPoints; i++) {
heights[i] = hMax * Math.sin(Math.PI * i/numPoints);
}
return heights;
}
var carto1 = new Cartographic.Cartographic();
var carto2 = new Cartographic.Cartographic();
var cartesian = new Cartographic.Cartesian3();
var scaleFirst = new Cartographic.Cartesian3();
var scaleLast = new Cartographic.Cartesian3();
var ellipsoidGeodesic = new EllipsoidGeodesic.EllipsoidGeodesic();
var ellipsoidRhumb = new EllipsoidRhumbLine.EllipsoidRhumbLine();
//Returns subdivided line scaled to ellipsoid surface starting at p1 and ending at p2.
//Result includes p1, but not include p2. This function is called for a sequence of line segments,
//and this prevents duplication of end point.
function generateCartesianArc(p0, p1, minDistance, ellipsoid, h0, h1, array, offset, hMax) {
var first = ellipsoid.scaleToGeodeticSurface(p0, scaleFirst);
var last = ellipsoid.scaleToGeodeticSurface(p1, scaleLast);
var numPoints = PolylinePipeline.numberOfPoints(p0, p1, minDistance);
var start = ellipsoid.cartesianToCartographic(first, carto1);
var end = ellipsoid.cartesianToCartographic(last, carto2);
var heights = subdivideHeights(numPoints, h0, h1);
if(hMax >0.0){
heights = subdivideHeightsBySin(numPoints, hMax);
}
ellipsoidGeodesic.setEndPoints(start, end);
var surfaceDistanceBetweenPoints = ellipsoidGeodesic.surfaceDistance / numPoints;
var index = offset;
start.height = h0;
var cart = ellipsoid.cartographicToCartesian(start, cartesian);
Cartographic.Cartesian3.pack(cart, array, index);
index += 3;
for (var i = 1; i < numPoints; i++) {
var carto = ellipsoidGeodesic.interpolateUsingSurfaceDistance(i * surfaceDistanceBetweenPoints, carto2);
carto.height = heights[i];
cart = ellipsoid.cartographicToCartesian(carto, cartesian);
Cartographic.Cartesian3.pack(cart, array, index);
index += 3;
}
return index;
}
//Returns subdivided line scaled to ellipsoid surface starting at p1 and ending at p2.
//Result includes p1, but not include p2. This function is called for a sequence of line segments,
//and this prevents duplication of end point.
function generateCartesianRhumbArc(p0, p1, granularity, ellipsoid, h0, h1, array, offset) {
var first = ellipsoid.scaleToGeodeticSurface(p0, scaleFirst);
var last = ellipsoid.scaleToGeodeticSurface(p1, scaleLast);
var start = ellipsoid.cartesianToCartographic(first, carto1);
var end = ellipsoid.cartesianToCartographic(last, carto2);
var numPoints = PolylinePipeline.numberOfPointsRhumbLine(start, end, granularity);
var heights = subdivideHeights(numPoints, h0, h1);
if (!ellipsoidRhumb.ellipsoid.equals(ellipsoid)) {
ellipsoidRhumb = new EllipsoidRhumbLine.EllipsoidRhumbLine(undefined, undefined, ellipsoid);
}
ellipsoidRhumb.setEndPoints(start, end);
var surfaceDistanceBetweenPoints = ellipsoidRhumb.surfaceDistance / numPoints;
var index = offset;
start.height = h0;
var cart = ellipsoid.cartographicToCartesian(start, cartesian);
Cartographic.Cartesian3.pack(cart, array, index);
index += 3;
for (var i = 1; i < numPoints; i++) {
var carto = ellipsoidRhumb.interpolateUsingSurfaceDistance(i * surfaceDistanceBetweenPoints, carto2);
carto.height = heights[i];
cart = ellipsoid.cartographicToCartesian(carto, cartesian);
Cartographic.Cartesian3.pack(cart, array, index);
index += 3;
}
return index;
}
/**
* Breaks a {@link Polyline} into segments such that it does not cross the ±180 degree meridian of an ellipsoid.
*
* @param {Cartesian3[]} positions The polyline's Cartesian positions.
* @param {Matrix4} [modelMatrix=Matrix4.IDENTITY] The polyline's model matrix. Assumed to be an affine
* transformation matrix, where the upper left 3x3 elements are a rotation matrix, and
* the upper three elements in the fourth column are the translation. The bottom row is assumed to be [0, 0, 0, 1].
* The matrix is not verified to be in the proper form.
* @returns {Object} An object with a <code>positions</code> property that is an array of positions and a
* <code>segments</code> property.
*
*
* @example
* var polylines = new Cesium.PolylineCollection();
* var polyline = polylines.add(...);
* var positions = polyline.positions;
* var modelMatrix = polylines.modelMatrix;
* var segments = Cesium.PolylinePipeline.wrapLongitude(positions, modelMatrix);
*
* @see PolygonPipeline.wrapLongitude
* @see Polyline
* @see PolylineCollection
*/
PolylinePipeline.wrapLongitude = function(positions, modelMatrix) {
var cartesians = [];
var segments = [];
if (when.defined(positions) && positions.length > 0) {
modelMatrix = when.defaultValue(modelMatrix, BoundingSphere.Matrix4.IDENTITY);
var inverseModelMatrix = BoundingSphere.Matrix4.inverseTransformation(modelMatrix, wrapLongitudeInversMatrix);
var origin = BoundingSphere.Matrix4.multiplyByPoint(inverseModelMatrix, Cartographic.Cartesian3.ZERO, wrapLongitudeOrigin);
var xzNormal = Cartographic.Cartesian3.normalize(BoundingSphere.Matrix4.multiplyByPointAsVector(inverseModelMatrix, Cartographic.Cartesian3.UNIT_Y, wrapLongitudeXZNormal), wrapLongitudeXZNormal);
var xzPlane = Plane.Plane.fromPointNormal(origin, xzNormal, wrapLongitudeXZPlane);
var yzNormal = Cartographic.Cartesian3.normalize(BoundingSphere.Matrix4.multiplyByPointAsVector(inverseModelMatrix, Cartographic.Cartesian3.UNIT_X, wrapLongitudeYZNormal), wrapLongitudeYZNormal);
var yzPlane = Plane.Plane.fromPointNormal(origin, yzNormal, wrapLongitudeYZPlane);
var count = 1;
cartesians.push(Cartographic.Cartesian3.clone(positions[0]));
var prev = cartesians[0];
var length = positions.length;
for (var i = 1; i < length; ++i) {
var cur = positions[i];
// intersects the IDL if either endpoint is on the negative side of the yz-plane
if (Plane.Plane.getPointDistance(yzPlane, prev) < 0.0 || Plane.Plane.getPointDistance(yzPlane, cur) < 0.0) {
// and intersects the xz-plane
var intersection = IntersectionTests.IntersectionTests.lineSegmentPlane(prev, cur, xzPlane, wrapLongitudeIntersection);
if (when.defined(intersection)) {
// move point on the xz-plane slightly away from the plane
var offset = Cartographic.Cartesian3.multiplyByScalar(xzNormal, 5.0e-9, wrapLongitudeOffset);
if (Plane.Plane.getPointDistance(xzPlane, prev) < 0.0) {
Cartographic.Cartesian3.negate(offset, offset);
}
cartesians.push(Cartographic.Cartesian3.add(intersection, offset, new Cartographic.Cartesian3()));
segments.push(count + 1);
Cartographic.Cartesian3.negate(offset, offset);
cartesians.push(Cartographic.Cartesian3.add(intersection, offset, new Cartographic.Cartesian3()));
count = 1;
}
}
cartesians.push(Cartographic.Cartesian3.clone(positions[i]));
count++;
prev = cur;
}
segments.push(count);
}
return {
positions : cartesians,
lengths : segments
};
};
/**
* Subdivides polyline and raises all points to the specified height. Returns an array of numbers to represent the positions.
* @param {Object} options Object with the following properties:
* @param {Cartesian3[]} options.positions The array of type {Cartesian3} representing positions.
* @param {Number|Number[]} [options.height=0.0] A number or array of numbers representing the heights of each position.
* @param {Number} [options.granularity = CesiumMath.RADIANS_PER_DEGREE] The distance, in radians, between each latitude and longitude. Determines the number of positions in the buffer.
* @param {Ellipsoid} [options.ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the positions lie.
* @returns {Number[]} A new array of positions of type {Number} that have been subdivided and raised to the surface of the ellipsoid.
*
* @example
* var positions = Cesium.Cartesian3.fromDegreesArray([
* -105.0, 40.0,
* -100.0, 38.0,
* -105.0, 35.0,
* -100.0, 32.0
* ]);
* var surfacePositions = Cesium.PolylinePipeline.generateArc({
* positons: positions
* });
*/
PolylinePipeline.generateArc = function(options) {
if (!when.defined(options)) {
options = {};
}
var positions = options.positions;
//>>includeStart('debug', pragmas.debug);
if (!when.defined(positions)) {
throw new Check.DeveloperError('options.positions is required.');
}
//>>includeEnd('debug');
var length = positions.length;
var ellipsoid = when.defaultValue(options.ellipsoid, Cartesian2.Ellipsoid.WGS84);
var height = when.defaultValue(options.height, 0);
var hasHeightArray = Array.isArray(height);
if (length < 1) {
return [];
} else if (length === 1) {
var p = ellipsoid.scaleToGeodeticSurface(positions[0], scaleFirst);
height = hasHeightArray ? height[0] : height;
if (height !== 0) {
var n = ellipsoid.geodeticSurfaceNormal(p, cartesian);
Cartographic.Cartesian3.multiplyByScalar(n, height, n);
Cartographic.Cartesian3.add(p, n, p);
}
return [p.x, p.y, p.z];
}
var minDistance = options.minDistance;
if (!when.defined(minDistance)) {
var granularity = when.defaultValue(options.granularity, _Math.CesiumMath.RADIANS_PER_DEGREE);
minDistance = _Math.CesiumMath.chordLength(granularity, ellipsoid.maximumRadius);
}
var numPoints = 0;
var i;
for (i = 0; i < length -1; i++) {
numPoints += PolylinePipeline.numberOfPoints(positions[i], positions[i+1], minDistance);
}
var hMax = options.hMax;
var arrayLength = (numPoints + 1) * 3;
var newPositions = new Array(arrayLength);
var offset = 0;
for (i = 0; i < length - 1; i++) {
var p0 = positions[i];
var p1 = positions[i + 1];
var h0 = hasHeightArray ? height[i] : height;
var h1 = hasHeightArray ? height[i + 1] : height;
offset = generateCartesianArc(p0, p1, minDistance, ellipsoid, h0, h1, newPositions, offset, hMax);
}
subdivideHeightsScratchArray.length = 0;
var lastPoint = positions[length - 1];
var carto = ellipsoid.cartesianToCartographic(lastPoint, carto1);
carto.height = hasHeightArray ? height[length - 1] : height;
var cart = ellipsoid.cartographicToCartesian(carto, cartesian);
Cartographic.Cartesian3.pack(cart, newPositions, arrayLength - 3);
return newPositions;
};
var scratchCartographic0 = new Cartographic.Cartographic();
var scratchCartographic1 = new Cartographic.Cartographic();
/**
* Subdivides polyline and raises all points to the specified height using Rhumb lines. Returns an array of numbers to represent the positions.
* @param {Object} options Object with the following properties:
* @param {Cartesian3[]} options.positions The array of type {Cartesian3} representing positions.
* @param {Number|Number[]} [options.height=0.0] A number or array of numbers representing the heights of each position.
* @param {Number} [options.granularity = CesiumMath.RADIANS_PER_DEGREE] The distance, in radians, between each latitude and longitude. Determines the number of positions in the buffer.
* @param {Ellipsoid} [options.ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the positions lie.
* @returns {Number[]} A new array of positions of type {Number} that have been subdivided and raised to the surface of the ellipsoid.
*
* @example
* var positions = Cesium.Cartesian3.fromDegreesArray([
* -105.0, 40.0,
* -100.0, 38.0,
* -105.0, 35.0,
* -100.0, 32.0
* ]);
* var surfacePositions = Cesium.PolylinePipeline.generateRhumbArc({
* positons: positions
* });
*/
PolylinePipeline.generateRhumbArc = function(options) {
if (!when.defined(options)) {
options = {};
}
var positions = options.positions;
//>>includeStart('debug', pragmas.debug);
if (!when.defined(positions)) {
throw new Check.DeveloperError('options.positions is required.');
}
//>>includeEnd('debug');
var length = positions.length;
var ellipsoid = when.defaultValue(options.ellipsoid, Cartesian2.Ellipsoid.WGS84);
var height = when.defaultValue(options.height, 0);
var hasHeightArray = Array.isArray(height);
if (length < 1) {
return [];
} else if (length === 1) {
var p = ellipsoid.scaleToGeodeticSurface(positions[0], scaleFirst);
height = hasHeightArray ? height[0] : height;
if (height !== 0) {
var n = ellipsoid.geodeticSurfaceNormal(p, cartesian);
Cartographic.Cartesian3.multiplyByScalar(n, height, n);
Cartographic.Cartesian3.add(p, n, p);
}
return [p.x, p.y, p.z];
}
var granularity = when.defaultValue(options.granularity, _Math.CesiumMath.RADIANS_PER_DEGREE);
var numPoints = 0;
var i;
var c0 = ellipsoid.cartesianToCartographic(positions[0], scratchCartographic0);
var c1;
for (i = 0; i < length - 1; i++) {
c1 = ellipsoid.cartesianToCartographic(positions[i + 1], scratchCartographic1);
numPoints += PolylinePipeline.numberOfPointsRhumbLine(c0, c1, granularity);
c0 = Cartographic.Cartographic.clone(c1, scratchCartographic0);
}
var arrayLength = (numPoints + 1) * 3;
var newPositions = new Array(arrayLength);
var offset = 0;
for (i = 0; i < length - 1; i++) {
var p0 = positions[i];
var p1 = positions[i + 1];
var h0 = hasHeightArray ? height[i] : height;
var h1 = hasHeightArray ? height[i + 1] : height;
offset = generateCartesianRhumbArc(p0, p1, granularity, ellipsoid, h0, h1, newPositions, offset);
}
subdivideHeightsScratchArray.length = 0;
var lastPoint = positions[length - 1];
var carto = ellipsoid.cartesianToCartographic(lastPoint, carto1);
carto.height = hasHeightArray ? height[length - 1] : height;
var cart = ellipsoid.cartographicToCartesian(carto, cartesian);
Cartographic.Cartesian3.pack(cart, newPositions, arrayLength - 3);
return newPositions;
};
/**
* Subdivides polyline and raises all points to the specified height. Returns an array of new {Cartesian3} positions.
* @param {Object} options Object with the following properties:
* @param {Cartesian3[]} options.positions The array of type {Cartesian3} representing positions.
* @param {Number|Number[]} [options.height=0.0] A number or array of numbers representing the heights of each position.
* @param {Number} [options.granularity = CesiumMath.RADIANS_PER_DEGREE] The distance, in radians, between each latitude and longitude. Determines the number of positions in the buffer.
* @param {Ellipsoid} [options.ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the positions lie.
* @returns {Cartesian3[]} A new array of cartesian3 positions that have been subdivided and raised to the surface of the ellipsoid.
*
* @example
* var positions = Cesium.Cartesian3.fromDegreesArray([
* -105.0, 40.0,
* -100.0, 38.0,
* -105.0, 35.0,
* -100.0, 32.0
* ]);
* var surfacePositions = Cesium.PolylinePipeline.generateCartesianArc({
* positons: positions
* });
*/
PolylinePipeline.generateCartesianArc = function(options) {
var numberArray = PolylinePipeline.generateArc(options);
var size = numberArray.length/3;
var newPositions = new Array(size);
for (var i = 0; i < size; i++) {
newPositions[i] = Cartographic.Cartesian3.unpack(numberArray, i*3);
}
return newPositions;
};
/**
* Subdivides polyline and raises all points to the specified height using Rhumb Lines. Returns an array of new {Cartesian3} positions.
* @param {Object} options Object with the following properties:
* @param {Cartesian3[]} options.positions The array of type {Cartesian3} representing positions.
* @param {Number|Number[]} [options.height=0.0] A number or array of numbers representing the heights of each position.
* @param {Number} [options.granularity = CesiumMath.RADIANS_PER_DEGREE] The distance, in radians, between each latitude and longitude. Determines the number of positions in the buffer.
* @param {Ellipsoid} [options.ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the positions lie.
* @returns {Cartesian3[]} A new array of cartesian3 positions that have been subdivided and raised to the surface of the ellipsoid.
*
* @example
* var positions = Cesium.Cartesian3.fromDegreesArray([
* -105.0, 40.0,
* -100.0, 38.0,
* -105.0, 35.0,
* -100.0, 32.0
* ]);
* var surfacePositions = Cesium.PolylinePipeline.generateCartesianRhumbArc({
* positons: positions
* });
*/
PolylinePipeline.generateCartesianRhumbArc = function(options) {
var numberArray = PolylinePipeline.generateRhumbArc(options);
var size = numberArray.length/3;
var newPositions = new Array(size);
for (var i = 0; i < size; i++) {
newPositions[i] = Cartographic.Cartesian3.unpack(numberArray, i*3);
}
return newPositions;
};
exports.PolylinePipeline = PolylinePipeline;
});