/**
* Cesium - https://github.com/CesiumGS/cesium
*
* Copyright 2011-2020 Cesium Contributors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* Columbus View (Pat. Pend.)
*
* Portions licensed separately.
* See https://github.com/CesiumGS/cesium/blob/master/LICENSE.md for full licensing details.
*/
define(['exports'], function (exports) { 'use strict';
// Copyright 2010 The Emscripten Authors. All rights reserved.
// Emscripten is available under two separate licenses, the MIT license and the
// University of Illinois/NCSA Open Source License. Both these licenses can be
// found in the LICENSE file.
// The Module object: Our interface to the outside world. We import
// and export values on it. There are various ways Module can be used:
// 1. Not defined. We create it here
// 2. A function parameter, function(Module) { ..generated code.. }
// 3. pre-run appended it, var Module = {}; ..generated code..
// 4. External script tag defines var Module.
// We need to check if Module already exists (e.g. case 3 above).
// Substitution will be replaced with actual code on later stage of the build,
// this way Closure Compiler will not mangle it (e.g. case 4. above).
// Note that if you want to run closure, and also to use Module
// after the generated code, you will need to define var Module = {};
// before the code. Then that object will be used in the code, and you
// can continue to use Module afterwards as well.
if (typeof WebAssembly !== 'undefined' && typeof window !== 'object') {
var Module = typeof Module !== 'undefined' ? Module : {};
// --pre-jses are emitted after the Module integration code, so that they can
// refer to Module (if they choose; they can also define Module)
// {{PRE_JSES}}
// Sometimes an existing Module object exists with properties
// meant to overwrite the default module functionality. Here
// we collect those properties and reapply _after_ we configure
// the current environment's defaults to avoid having to be so
// defensive during initialization.
var moduleOverrides = {};
var key;
for (key in Module) {
if (Module.hasOwnProperty(key)) {
moduleOverrides[key] = Module[key];
}
}
Module['arguments'] = [];
Module['thisProgram'] = './this.program';
Module['quit'] = function(status, toThrow) {
throw toThrow;
};
Module['preRun'] = [];
Module['postRun'] = [];
// Determine the runtime environment we are in. You can customize this by
// setting the ENVIRONMENT setting at compile time (see settings.js).
var ENVIRONMENT_IS_WEB = false;
var ENVIRONMENT_IS_WORKER = false;
var ENVIRONMENT_IS_NODE = false;
var ENVIRONMENT_HAS_NODE = false;
var ENVIRONMENT_IS_SHELL = false;
ENVIRONMENT_IS_WEB = typeof window === 'object';
ENVIRONMENT_IS_WORKER = typeof importScripts === 'function';
// A web environment like Electron.js can have Node enabled, so we must
// distinguish between Node-enabled environments and Node environments per se.
// This will allow the former to do things like mount NODEFS.
ENVIRONMENT_HAS_NODE = typeof process === 'object' && typeof require === 'function';
ENVIRONMENT_IS_NODE = ENVIRONMENT_HAS_NODE && !ENVIRONMENT_IS_WEB && !ENVIRONMENT_IS_WORKER;
ENVIRONMENT_IS_SHELL = !ENVIRONMENT_IS_WEB && !ENVIRONMENT_IS_NODE && !ENVIRONMENT_IS_WORKER;
if (Module['ENVIRONMENT']) {
throw new Error('Module.ENVIRONMENT has been deprecated. To force the environment, use the ENVIRONMENT compile-time option (for example, -s ENVIRONMENT=web or -s ENVIRONMENT=node)');
}
// Three configurations we can be running in:
// 1) We could be the application main() thread running in the main JS UI thread. (ENVIRONMENT_IS_WORKER == false and ENVIRONMENT_IS_PTHREAD == false)
// 2) We could be the application main() thread proxied to worker. (with Emscripten -s PROXY_TO_WORKER=1) (ENVIRONMENT_IS_WORKER == true, ENVIRONMENT_IS_PTHREAD == false)
// 3) We could be an application pthread running in a worker. (ENVIRONMENT_IS_WORKER == true and ENVIRONMENT_IS_PTHREAD == true)
// `/` should be present at the end if `scriptDirectory` is not empty
var scriptDirectory = '';
function locateFile(path) {
if (Module['locateFile']) {
return Module['locateFile'](path, scriptDirectory);
} else {
return scriptDirectory + path;
}
}
if (ENVIRONMENT_IS_NODE) {
scriptDirectory = __dirname + '/';
// Expose functionality in the same simple way that the shells work
// Note that we pollute the global namespace here, otherwise we break in node
var nodeFS;
var nodePath;
Module['read'] = function shell_read(filename, binary) {
var ret;
if (!nodeFS) nodeFS = require('fs');
if (!nodePath) nodePath = require('path');
filename = nodePath['normalize'](filename);
ret = nodeFS['readFileSync'](filename);
return binary ? ret : ret.toString();
};
Module['readBinary'] = function readBinary(filename) {
var ret = Module['read'](filename, true);
if (!ret.buffer) {
ret = new Uint8Array(ret);
}
assert(ret.buffer);
return ret;
};
if (process['argv'].length > 1) {
Module['thisProgram'] = process['argv'][1].replace(/\\/g, '/');
}
Module['arguments'] = process['argv'].slice(2);
if (typeof module !== 'undefined') {
module['exports'] = Module;
}
process['on']('uncaughtException', function(ex) {
// suppress ExitStatus exceptions from showing an error
if (!(ex instanceof ExitStatus)) {
throw ex;
}
});
// Currently node will swallow unhandled rejections, but this behavior is
// deprecated, and in the future it will exit with error status.
process['on']('unhandledRejection', abort);
Module['quit'] = function(status) {
process['exit'](status);
};
Module['inspect'] = function () { return '[Emscripten Module object]'; };
} else
if (ENVIRONMENT_IS_SHELL) {
if (typeof read != 'undefined') {
Module['read'] = function shell_read(f) {
return read(f);
};
}
Module['readBinary'] = function readBinary(f) {
var data;
if (typeof readbuffer === 'function') {
return new Uint8Array(readbuffer(f));
}
data = read(f, 'binary');
assert(typeof data === 'object');
return data;
};
if (typeof scriptArgs != 'undefined') {
Module['arguments'] = scriptArgs;
} else if (typeof arguments != 'undefined') {
Module['arguments'] = arguments;
}
if (typeof quit === 'function') {
Module['quit'] = function(status) {
quit(status);
};
}
} else
if (ENVIRONMENT_IS_WEB || ENVIRONMENT_IS_WORKER) {
if (ENVIRONMENT_IS_WORKER) { // Check worker, not web, since window could be polyfilled
scriptDirectory = self.location.href;
} else if (document.currentScript) { // web
scriptDirectory = document.currentScript.src;
}
// blob urls look like blob:http://site.com/etc/etc and we cannot infer anything from them.
// otherwise, slice off the final part of the url to find the script directory.
// if scriptDirectory does not contain a slash, lastIndexOf will return -1,
// and scriptDirectory will correctly be replaced with an empty string.
if (scriptDirectory.indexOf('blob:') !== 0) {
scriptDirectory = scriptDirectory.substr(0, scriptDirectory.indexOf('/Workers') + 1);
} else {
scriptDirectory = '';
}
Module['read'] = function shell_read(url) {
var xhr = new XMLHttpRequest();
xhr.open('GET', url, false);
xhr.send(null);
return xhr.responseText;
};
if (ENVIRONMENT_IS_WORKER) {
Module['readBinary'] = function readBinary(url) {
var xhr = new XMLHttpRequest();
xhr.open('GET', url, false);
xhr.responseType = 'arraybuffer';
xhr.send(null);
return new Uint8Array(xhr.response);
};
}
Module['readAsync'] = function readAsync(url, onload, onerror) {
var xhr = new XMLHttpRequest();
xhr.open('GET', url, true);
xhr.responseType = 'arraybuffer';
xhr.onload = function xhr_onload() {
if (xhr.status == 200 || (xhr.status == 0 && xhr.response)) { // file URLs can return 0
onload(xhr.response);
return;
}
onerror();
};
xhr.onerror = onerror;
xhr.send(null);
};
Module['setWindowTitle'] = function(title) { document.title = title; };
} else
{
throw new Error('environment detection error');
}
// Set up the out() and err() hooks, which are how we can print to stdout or
// stderr, respectively.
// If the user provided Module.print or printErr, use that. Otherwise,
// console.log is checked first, as 'print' on the web will open a print dialogue
// printErr is preferable to console.warn (works better in shells)
// bind(console) is necessary to fix IE/Edge closed dev tools panel behavior.
var out = Module['print'] || (typeof console !== 'undefined' ? console.log.bind(console) : (typeof print !== 'undefined' ? print : null));
var err = Module['printErr'] || (typeof printErr !== 'undefined' ? printErr : ((typeof console !== 'undefined' && console.warn.bind(console)) || out));
// Merge back in the overrides
for (key in moduleOverrides) {
if (moduleOverrides.hasOwnProperty(key)) {
Module[key] = moduleOverrides[key];
}
}
// Free the object hierarchy contained in the overrides, this lets the GC
// reclaim data used e.g. in memoryInitializerRequest, which is a large typed array.
moduleOverrides = undefined;
// perform assertions in shell.js after we set up out() and err(), as otherwise if an assertion fails it cannot print the message
assert(typeof Module['memoryInitializerPrefixURL'] === 'undefined', 'Module.memoryInitializerPrefixURL option was removed, use Module.locateFile instead');
assert(typeof Module['pthreadMainPrefixURL'] === 'undefined', 'Module.pthreadMainPrefixURL option was removed, use Module.locateFile instead');
assert(typeof Module['cdInitializerPrefixURL'] === 'undefined', 'Module.cdInitializerPrefixURL option was removed, use Module.locateFile instead');
assert(typeof Module['filePackagePrefixURL'] === 'undefined', 'Module.filePackagePrefixURL option was removed, use Module.locateFile instead');
// stack management, and other functionality that is provided by the compiled code,
// should not be used before it is ready
stackSave = stackRestore = stackAlloc = function() {
abort('cannot use the stack before compiled code is ready to run, and has provided stack access');
};
function warnOnce(text) {
if (!warnOnce.shown) warnOnce.shown = {};
if (!warnOnce.shown[text]) {
warnOnce.shown[text] = 1;
//err(text);
}
}
var asm2wasmImports = { // special asm2wasm imports
"f64-rem": function(x, y) {
return x % y;
},
"debugger": function() {
debugger;
}
};
var functionPointers = new Array(0);
var tempRet0 = 0;
var setTempRet0 = function(value) {
tempRet0 = value;
};
var getTempRet0 = function() {
return tempRet0;
};
// === Preamble library stuff ===
// Documentation for the public APIs defined in this file must be updated in:
// site/source/docs/api_reference/preamble.js.rst
// A prebuilt local version of the documentation is available at:
// site/build/text/docs/api_reference/preamble.js.txt
// You can also build docs locally as HTML or other formats in site/
// An online HTML version (which may be of a different version of Emscripten)
// is up at http://kripken.github.io/emscripten-site/docs/api_reference/preamble.js.html
if (typeof WebAssembly !== 'object') {
abort('No WebAssembly support found. Build with -s WASM=0 to target JavaScript instead.');
}
/** @type {function(number, string, boolean=)} */
function getValue(ptr, type, noSafe) {
type = type || 'i8';
if (type.charAt(type.length-1) === '*') type = 'i32'; // pointers are 32-bit
switch(type) {
case 'i1': return HEAP8[((ptr)>>0)];
case 'i8': return HEAP8[((ptr)>>0)];
case 'i16': return HEAP16[((ptr)>>1)];
case 'i32': return HEAP32[((ptr)>>2)];
case 'i64': return HEAP32[((ptr)>>2)];
case 'float': return HEAPF32[((ptr)>>2)];
case 'double': return HEAPF64[((ptr)>>3)];
default: abort('invalid type for getValue: ' + type);
}
return null;
}
// Wasm globals
var wasmMemory;
// Potentially used for direct table calls.
var wasmTable;
//========================================
// Runtime essentials
//========================================
// whether we are quitting the application. no code should run after this.
// set in exit() and abort()
var ABORT = false;
/** @type {function(*, string=)} */
function assert(condition, text) {
if (!condition) {
abort('Assertion failed: ' + text);
}
}
// Returns the C function with a specified identifier (for C++, you need to do manual name mangling)
function getCFunc(ident) {
var func = Module['_' + ident]; // closure exported function
assert(func, 'Cannot call unknown function ' + ident + ', make sure it is exported');
return func;
}
// C calling interface.
function ccall(ident, returnType, argTypes, args, opts) {
// For fast lookup of conversion functions
var toC = {
'string': function(str) {
var ret = 0;
if (str !== null && str !== undefined && str !== 0) { // null string
// at most 4 bytes per UTF-8 code point, +1 for the trailing '\0'
var len = (str.length << 2) + 1;
ret = stackAlloc(len);
stringToUTF8(str, ret, len);
}
return ret;
},
'array': function(arr) {
var ret = stackAlloc(arr.length);
writeArrayToMemory(arr, ret);
return ret;
}
};
function convertReturnValue(ret) {
if (returnType === 'string') return UTF8ToString(ret);
if (returnType === 'boolean') return Boolean(ret);
return ret;
}
var func = getCFunc(ident);
var cArgs = [];
var stack = 0;
assert(returnType !== 'array', 'Return type should not be "array".');
if (args) {
for (var i = 0; i < args.length; i++) {
var converter = toC[argTypes[i]];
if (converter) {
if (stack === 0) stack = stackSave();
cArgs[i] = converter(args[i]);
} else {
cArgs[i] = args[i];
}
}
}
var ret = func.apply(null, cArgs);
ret = convertReturnValue(ret);
if (stack !== 0) stackRestore(stack);
return ret;
}
function cwrap(ident, returnType, argTypes, opts) {
return function() {
return ccall(ident, returnType, argTypes, arguments);
}
}
// Given a pointer 'ptr' to a null-terminated UTF8-encoded string in the given array that contains uint8 values, returns
// a copy of that string as a Javascript String object.
var UTF8Decoder = typeof TextDecoder !== 'undefined' ? new TextDecoder('utf8') : undefined;
/**
* @param {number} idx
* @param {number=} maxBytesToRead
* @return {string}
*/
function UTF8ArrayToString(u8Array, idx, maxBytesToRead) {
var endIdx = idx + maxBytesToRead;
var endPtr = idx;
// TextDecoder needs to know the byte length in advance, it doesn't stop on null terminator by itself.
// Also, use the length info to avoid running tiny strings through TextDecoder, since .subarray() allocates garbage.
// (As a tiny code save trick, compare endPtr against endIdx using a negation, so that undefined means Infinity)
while (u8Array[endPtr] && !(endPtr >= endIdx)) ++endPtr;
if (endPtr - idx > 16 && u8Array.subarray && UTF8Decoder) {
return UTF8Decoder.decode(u8Array.subarray(idx, endPtr));
} else {
var str = '';
// If building with TextDecoder, we have already computed the string length above, so test loop end condition against that
while (idx < endPtr) {
// For UTF8 byte structure, see:
// http://en.wikipedia.org/wiki/UTF-8#Description
// https://www.ietf.org/rfc/rfc2279.txt
// https://tools.ietf.org/html/rfc3629
var u0 = u8Array[idx++];
if (!(u0 & 0x80)) { str += String.fromCharCode(u0); continue; }
var u1 = u8Array[idx++] & 63;
if ((u0 & 0xE0) == 0xC0) { str += String.fromCharCode(((u0 & 31) << 6) | u1); continue; }
var u2 = u8Array[idx++] & 63;
if ((u0 & 0xF0) == 0xE0) {
u0 = ((u0 & 15) << 12) | (u1 << 6) | u2;
} else {
if ((u0 & 0xF8) != 0xF0) warnOnce('Invalid UTF-8 leading byte 0x' + u0.toString(16) + ' encountered when deserializing a UTF-8 string on the asm.js/wasm heap to a JS string!');
u0 = ((u0 & 7) << 18) | (u1 << 12) | (u2 << 6) | (u8Array[idx++] & 63);
}
if (u0 < 0x10000) {
str += String.fromCharCode(u0);
} else {
var ch = u0 - 0x10000;
str += String.fromCharCode(0xD800 | (ch >> 10), 0xDC00 | (ch & 0x3FF));
}
}
}
return str;
}
// Given a pointer 'ptr' to a null-terminated UTF8-encoded string in the emscripten HEAP, returns a
// copy of that string as a Javascript String object.
// maxBytesToRead: an optional length that specifies the maximum number of bytes to read. You can omit
// this parameter to scan the string until the first \0 byte. If maxBytesToRead is
// passed, and the string at [ptr, ptr+maxBytesToReadr[ contains a null byte in the
// middle, then the string will cut short at that byte index (i.e. maxBytesToRead will
// not produce a string of exact length [ptr, ptr+maxBytesToRead[)
// N.B. mixing frequent uses of UTF8ToString() with and without maxBytesToRead may
// throw JS JIT optimizations off, so it is worth to consider consistently using one
// style or the other.
/**
* @param {number} ptr
* @param {number=} maxBytesToRead
* @return {string}
*/
function UTF8ToString(ptr, maxBytesToRead) {
return ptr ? UTF8ArrayToString(HEAPU8, ptr, maxBytesToRead) : '';
}
// Copies the given Javascript String object 'str' to the given byte array at address 'outIdx',
// encoded in UTF8 form and null-terminated. The copy will require at most str.length*4+1 bytes of space in the HEAP.
// Use the function lengthBytesUTF8 to compute the exact number of bytes (excluding null terminator) that this function will write.
// Parameters:
// str: the Javascript string to copy.
// outU8Array: the array to copy to. Each index in this array is assumed to be one 8-byte element.
// outIdx: The starting offset in the array to begin the copying.
// maxBytesToWrite: The maximum number of bytes this function can write to the array.
// This count should include the null terminator,
// i.e. if maxBytesToWrite=1, only the null terminator will be written and nothing else.
// maxBytesToWrite=0 does not write any bytes to the output, not even the null terminator.
// Returns the number of bytes written, EXCLUDING the null terminator.
function stringToUTF8Array(str, outU8Array, outIdx, maxBytesToWrite) {
if (!(maxBytesToWrite > 0)) // Parameter maxBytesToWrite is not optional. Negative values, 0, null, undefined and false each don't write out any bytes.
return 0;
var startIdx = outIdx;
var endIdx = outIdx + maxBytesToWrite - 1; // -1 for string null terminator.
for (var i = 0; i < str.length; ++i) {
// Gotcha: charCodeAt returns a 16-bit word that is a UTF-16 encoded code unit, not a Unicode code point of the character! So decode UTF16->UTF32->UTF8.
// See http://unicode.org/faq/utf_bom.html#utf16-3
// For UTF8 byte structure, see http://en.wikipedia.org/wiki/UTF-8#Description and https://www.ietf.org/rfc/rfc2279.txt and https://tools.ietf.org/html/rfc3629
var u = str.charCodeAt(i); // possibly a lead surrogate
if (u >= 0xD800 && u <= 0xDFFF) {
var u1 = str.charCodeAt(++i);
u = 0x10000 + ((u & 0x3FF) << 10) | (u1 & 0x3FF);
}
if (u <= 0x7F) {
if (outIdx >= endIdx) break;
outU8Array[outIdx++] = u;
} else if (u <= 0x7FF) {
if (outIdx + 1 >= endIdx) break;
outU8Array[outIdx++] = 0xC0 | (u >> 6);
outU8Array[outIdx++] = 0x80 | (u & 63);
} else if (u <= 0xFFFF) {
if (outIdx + 2 >= endIdx) break;
outU8Array[outIdx++] = 0xE0 | (u >> 12);
outU8Array[outIdx++] = 0x80 | ((u >> 6) & 63);
outU8Array[outIdx++] = 0x80 | (u & 63);
} else {
if (outIdx + 3 >= endIdx) break;
if (u >= 0x200000) warnOnce('Invalid Unicode code point 0x' + u.toString(16) + ' encountered when serializing a JS string to an UTF-8 string on the asm.js/wasm heap! (Valid unicode code points should be in range 0-0x1FFFFF).');
outU8Array[outIdx++] = 0xF0 | (u >> 18);
outU8Array[outIdx++] = 0x80 | ((u >> 12) & 63);
outU8Array[outIdx++] = 0x80 | ((u >> 6) & 63);
outU8Array[outIdx++] = 0x80 | (u & 63);
}
}
// Null-terminate the pointer to the buffer.
outU8Array[outIdx] = 0;
return outIdx - startIdx;
}
// Copies the given Javascript String object 'str' to the emscripten HEAP at address 'outPtr',
// null-terminated and encoded in UTF8 form. The copy will require at most str.length*4+1 bytes of space in the HEAP.
// Use the function lengthBytesUTF8 to compute the exact number of bytes (excluding null terminator) that this function will write.
// Returns the number of bytes written, EXCLUDING the null terminator.
function stringToUTF8(str, outPtr, maxBytesToWrite) {
assert(typeof maxBytesToWrite == 'number', 'stringToUTF8(str, outPtr, maxBytesToWrite) is missing the third parameter that specifies the length of the output buffer!');
return stringToUTF8Array(str, HEAPU8,outPtr, maxBytesToWrite);
}
// Given a pointer 'ptr' to a null-terminated UTF16LE-encoded string in the emscripten HEAP, returns
// a copy of that string as a Javascript String object.
var UTF16Decoder = typeof TextDecoder !== 'undefined' ? new TextDecoder('utf-16le') : undefined;
function writeArrayToMemory(array, buffer) {
assert(array.length >= 0, 'writeArrayToMemory array must have a length (should be an array or typed array)');
HEAP8.set(array, buffer);
}
function demangle(func) {
return func;
}
function demangleAll(text) {
var regex =
/__Z[\w\d_]+/g;
return text.replace(regex,
function(x) {
var y = demangle(x);
return x === y ? x : (y + ' [' + x + ']');
});
}
function jsStackTrace() {
var err = new Error();
if (!err.stack) {
// IE10+ special cases: It does have callstack info, but it is only populated if an Error object is thrown,
// so try that as a special-case.
try {
throw new Error(0);
} catch(e) {
err = e;
}
if (!err.stack) {
return '(no stack trace available)';
}
}
return err.stack.toString();
}
function stackTrace() {
var js = jsStackTrace();
if (Module['extraStackTrace']) js += '\n' + Module['extraStackTrace']();
return demangleAll(js);
}
var WASM_PAGE_SIZE = 65536;
function alignUp(x, multiple) {
if (x % multiple > 0) {
x += multiple - (x % multiple);
}
return x;
}
var /** @type {ArrayBuffer} */
buffer,
/** @type {Int8Array} */
HEAP8,
/** @type {Uint8Array} */
HEAPU8,
/** @type {Int16Array} */
HEAP16,
/** @type {Uint16Array} */
HEAPU16,
/** @type {Int32Array} */
HEAP32,
/** @type {Uint32Array} */
HEAPU32,
/** @type {Float32Array} */
HEAPF32,
/** @type {Float64Array} */
HEAPF64;
function updateGlobalBufferViews() {
Module['HEAP8'] = HEAP8 = new Int8Array(buffer);
Module['HEAP16'] = HEAP16 = new Int16Array(buffer);
Module['HEAP32'] = HEAP32 = new Int32Array(buffer);
Module['HEAPU8'] = HEAPU8 = new Uint8Array(buffer);
Module['HEAPU16'] = HEAPU16 = new Uint16Array(buffer);
Module['HEAPU32'] = HEAPU32 = new Uint32Array(buffer);
Module['HEAPF32'] = HEAPF32 = new Float32Array(buffer);
Module['HEAPF64'] = HEAPF64 = new Float64Array(buffer);
}
var STACK_BASE = 15104,
STACK_MAX = 5257984,
DYNAMIC_BASE = 5257984,
DYNAMICTOP_PTR = 15072;
assert(STACK_BASE % 16 === 0, 'stack must start aligned');
assert(DYNAMIC_BASE % 16 === 0, 'heap must start aligned');
var TOTAL_STACK = 5242880;
if (Module['TOTAL_STACK']) assert(TOTAL_STACK === Module['TOTAL_STACK'], 'the stack size can no longer be determined at runtime');
var INITIAL_TOTAL_MEMORY = Module['TOTAL_MEMORY'] || 16777216;
if (INITIAL_TOTAL_MEMORY < TOTAL_STACK) err('TOTAL_MEMORY should be larger than TOTAL_STACK, was ' + INITIAL_TOTAL_MEMORY + '! (TOTAL_STACK=' + TOTAL_STACK + ')');
// Initialize the runtime's memory
// check for full engine support (use string 'subarray' to avoid closure compiler confusion)
assert(typeof Int32Array !== 'undefined' && typeof Float64Array !== 'undefined' && Int32Array.prototype.subarray !== undefined && Int32Array.prototype.set !== undefined,
'JS engine does not provide full typed array support');
// Use a provided buffer, if there is one, or else allocate a new one
if (Module['buffer']) {
buffer = Module['buffer'];
assert(buffer.byteLength === INITIAL_TOTAL_MEMORY, 'provided buffer should be ' + INITIAL_TOTAL_MEMORY + ' bytes, but it is ' + buffer.byteLength);
} else {
// Use a WebAssembly memory where available
if (typeof WebAssembly === 'object' && typeof WebAssembly.Memory === 'function') {
assert(INITIAL_TOTAL_MEMORY % WASM_PAGE_SIZE === 0);
wasmMemory = new WebAssembly.Memory({ 'initial': INITIAL_TOTAL_MEMORY / WASM_PAGE_SIZE });
buffer = wasmMemory.buffer;
} else
{
buffer = new ArrayBuffer(INITIAL_TOTAL_MEMORY);
}
assert(buffer.byteLength === INITIAL_TOTAL_MEMORY);
}
updateGlobalBufferViews();
HEAP32[DYNAMICTOP_PTR>>2] = DYNAMIC_BASE;
// Initializes the stack cookie. Called at the startup of main and at the startup of each thread in pthreads mode.
function writeStackCookie() {
assert((STACK_MAX & 3) == 0);
HEAPU32[(STACK_MAX >> 2)-1] = 0x02135467;
HEAPU32[(STACK_MAX >> 2)-2] = 0x89BACDFE;
}
function checkStackCookie() {
if (HEAPU32[(STACK_MAX >> 2)-1] != 0x02135467 || HEAPU32[(STACK_MAX >> 2)-2] != 0x89BACDFE) {
abort('Stack overflow! Stack cookie has been overwritten, expected hex dwords 0x89BACDFE and 0x02135467, but received 0x' + HEAPU32[(STACK_MAX >> 2)-2].toString(16) + ' ' + HEAPU32[(STACK_MAX >> 2)-1].toString(16));
}
// Also test the global address 0 for integrity.
if (HEAP32[0] !== 0x63736d65 /* 'emsc' */) abort('Runtime error: The application has corrupted its heap memory area (address zero)!');
}
function abortStackOverflow(allocSize) {
abort('Stack overflow! Attempted to allocate ' + allocSize + ' bytes on the stack, but stack has only ' + (STACK_MAX - stackSave() + allocSize) + ' bytes available!');
}
HEAP32[0] = 0x63736d65; /* 'emsc' */
// Endianness check (note: assumes compiler arch was little-endian)
HEAP16[1] = 0x6373;
if (HEAPU8[2] !== 0x73 || HEAPU8[3] !== 0x63) throw 'Runtime error: expected the system to be little-endian!';
function callRuntimeCallbacks(callbacks) {
while(callbacks.length > 0) {
var callback = callbacks.shift();
if (typeof callback == 'function') {
callback();
continue;
}
var func = callback.func;
if (typeof func === 'number') {
if (callback.arg === undefined) {
Module['dynCall_v'](func);
} else {
Module['dynCall_vi'](func, callback.arg);
}
} else {
func(callback.arg === undefined ? null : callback.arg);
}
}
}
var __ATPRERUN__ = []; // functions called before the runtime is initialized
var __ATINIT__ = []; // functions called during startup
var __ATMAIN__ = []; // functions called when main() is to be run
var __ATPOSTRUN__ = []; // functions called after the main() is called
var runtimeInitialized = false;
var runtimeExited = false;
function preRun() {
// compatibility - merge in anything from Module['preRun'] at this time
if (Module['preRun']) {
if (typeof Module['preRun'] == 'function') Module['preRun'] = [Module['preRun']];
while (Module['preRun'].length) {
addOnPreRun(Module['preRun'].shift());
}
}
callRuntimeCallbacks(__ATPRERUN__);
}
function ensureInitRuntime() {
checkStackCookie();
if (runtimeInitialized) return;
runtimeInitialized = true;
callRuntimeCallbacks(__ATINIT__);
}
function preMain() {
checkStackCookie();
callRuntimeCallbacks(__ATMAIN__);
}
function postRun() {
checkStackCookie();
// compatibility - merge in anything from Module['postRun'] at this time
if (Module['postRun']) {
if (typeof Module['postRun'] == 'function') Module['postRun'] = [Module['postRun']];
while (Module['postRun'].length) {
addOnPostRun(Module['postRun'].shift());
}
}
callRuntimeCallbacks(__ATPOSTRUN__);
}
function addOnPreRun(cb) {
__ATPRERUN__.unshift(cb);
}
function addOnPostRun(cb) {
__ATPOSTRUN__.unshift(cb);
}
assert(Math.imul, 'This browser does not support Math.imul(), build with LEGACY_VM_SUPPORT or POLYFILL_OLD_MATH_FUNCTIONS to add in a polyfill');
assert(Math.fround, 'This browser does not support Math.fround(), build with LEGACY_VM_SUPPORT or POLYFILL_OLD_MATH_FUNCTIONS to add in a polyfill');
assert(Math.clz32, 'This browser does not support Math.clz32(), build with LEGACY_VM_SUPPORT or POLYFILL_OLD_MATH_FUNCTIONS to add in a polyfill');
assert(Math.trunc, 'This browser does not support Math.trunc(), build with LEGACY_VM_SUPPORT or POLYFILL_OLD_MATH_FUNCTIONS to add in a polyfill');
// A counter of dependencies for calling run(). If we need to
// do asynchronous work before running, increment this and
// decrement it. Incrementing must happen in a place like
// Module.preRun (used by emcc to add file preloading).
// Note that you can add dependencies in preRun, even though
// it happens right before run - run will be postponed until
// the dependencies are met.
var runDependencies = 0;
var runDependencyWatcher = null;
var dependenciesFulfilled = null; // overridden to take different actions when all run dependencies are fulfilled
var runDependencyTracking = {};
function addRunDependency(id) {
runDependencies++;
if (Module['monitorRunDependencies']) {
Module['monitorRunDependencies'](runDependencies);
}
if (id) {
assert(!runDependencyTracking[id]);
runDependencyTracking[id] = 1;
if (runDependencyWatcher === null && typeof setInterval !== 'undefined') {
// Check for missing dependencies every few seconds
runDependencyWatcher = setInterval(function() {
if (ABORT) {
clearInterval(runDependencyWatcher);
runDependencyWatcher = null;
return;
}
}, 10000);
}
}
}
function removeRunDependency(id) {
runDependencies--;
if (Module['monitorRunDependencies']) {
Module['monitorRunDependencies'](runDependencies);
}
if (id) {
assert(runDependencyTracking[id]);
delete runDependencyTracking[id];
} else {
err('warning: run dependency removed without ID');
}
if (runDependencies == 0) {
if (runDependencyWatcher !== null) {
clearInterval(runDependencyWatcher);
runDependencyWatcher = null;
}
if (dependenciesFulfilled) {
var callback = dependenciesFulfilled;
dependenciesFulfilled = null;
callback(); // can add another dependenciesFulfilled
}
}
}
Module["preloadedImages"] = {}; // maps url to image data
Module["preloadedAudios"] = {}; // maps url to audio data
// show errors on likely calls to FS when it was not included
var FS = {
error: function() {
abort('Filesystem support (FS) was not included. The problem is that you are using files from JS, but files were not used from C/C++, so filesystem support was not auto-included. You can force-include filesystem support with -s FORCE_FILESYSTEM=1');
},
init: function() { FS.error(); },
createDataFile: function() { FS.error(); },
createPreloadedFile: function() { FS.error(); },
createLazyFile: function() { FS.error(); },
open: function() { FS.error(); },
mkdev: function() { FS.error(); },
registerDevice: function() { FS.error(); },
analyzePath: function() { FS.error(); },
loadFilesFromDB: function() { FS.error(); },
ErrnoError: function ErrnoError() { FS.error(); },
};
Module['FS_createDataFile'] = FS.createDataFile;
Module['FS_createPreloadedFile'] = FS.createPreloadedFile;
// Copyright 2017 The Emscripten Authors. All rights reserved.
// Emscripten is available under two separate licenses, the MIT license and the
// University of Illinois/NCSA Open Source License. Both these licenses can be
// found in the LICENSE file.
// Prefix of data URIs emitted by SINGLE_FILE and related options.
var dataURIPrefix = 'data:application/octet-stream;base64,';
// Indicates whether filename is a base64 data URI.
function isDataURI(filename) {
return String.prototype.startsWith ?
filename.startsWith(dataURIPrefix) :
filename.indexOf(dataURIPrefix) === 0;
}
var wasmBinaryFile = 'ThirdParty/unzip.wasm';
if (!isDataURI(wasmBinaryFile)) {
wasmBinaryFile = locateFile(wasmBinaryFile);
}
function getBinary() {
try {
if (Module['wasmBinary']) {
return new Uint8Array(Module['wasmBinary']);
}
if (Module['readBinary']) {
return Module['readBinary'](wasmBinaryFile);
} else {
throw "both async and sync fetching of the wasm failed";
}
}
catch (err) {
abort(err);
}
}
function getBinaryPromise() {
// if we don't have the binary yet, and have the Fetch api, use that
// in some environments, like Electron's render process, Fetch api may be present, but have a different context than expected, let's only use it on the Web
if (!Module['wasmBinary'] && (ENVIRONMENT_IS_WEB || ENVIRONMENT_IS_WORKER) && typeof fetch === 'function') {
return fetch(wasmBinaryFile, { credentials: 'same-origin' }).then(function(response) {
if (!response['ok']) {
throw "failed to load wasm binary file at '" + wasmBinaryFile + "'";
}
return response['arrayBuffer']();
}).catch(function () {
return getBinary();
});
}
// Otherwise, getBinary should be able to get it synchronously
return new Promise(function(resolve, reject) {
resolve(getBinary());
});
}
// Create the wasm instance.
// Receives the wasm imports, returns the exports.
function createWasm(env) {
// prepare imports
var info = {
'env': env
,
'global': {
'NaN': NaN,
'Infinity': Infinity
},
'global.Math': Math,
'asm2wasm': asm2wasmImports
};
// Load the wasm module and create an instance of using native support in the JS engine.
// handle a generated wasm instance, receiving its exports and
// performing other necessary setup
function receiveInstance(instance, module) {
var exports = instance.exports;
Module['asm'] = exports;
removeRunDependency('wasm-instantiate');
}
addRunDependency('wasm-instantiate');
// Async compilation can be confusing when an error on the page overwrites Module
// (for example, if the order of elements is wrong, and the one defining Module is
// later), so we save Module and check it later.
var trueModule = Module;
function receiveInstantiatedSource(output) {
// 'output' is a WebAssemblyInstantiatedSource object which has both the module and instance.
// receiveInstance() will swap in the exports (to Module.asm) so they can be called
assert(Module === trueModule, 'the Module object should not be replaced during async compilation - perhaps the order of HTML elements is wrong?');
trueModule = null;
// TODO: Due to Closure regression https://github.com/google/closure-compiler/issues/3193, the above line no longer optimizes out down to the following line.
// When the regression is fixed, can restore the above USE_PTHREADS-enabled path.
receiveInstance(output['instance']);
}
function instantiateArrayBuffer(receiver) {
return getBinaryPromise().then(function(binary) {
return WebAssembly.instantiate(binary, info);
}).then(receiver, function(reason) {
//err('failed to asynchronously prepare wasm: ' + reason);
//abort(reason);
});
}
// Prefer streaming instantiation if available.
function instantiateAsync() {
if (!Module['wasmBinary'] &&
typeof WebAssembly.instantiateStreaming === 'function' &&
!isDataURI(wasmBinaryFile) &&
typeof fetch === 'function') {
fetch(wasmBinaryFile, { credentials: 'same-origin' }).then(function (response) {
return WebAssembly.instantiateStreaming(response, info)
.then(receiveInstantiatedSource, function(reason) {
// We expect the most common failure cause to be a bad MIME type for the binary,
// in which case falling back to ArrayBuffer instantiation should work.
// err('wasm streaming compile failed: ' + reason);
// err('falling back to ArrayBuffer instantiation');
instantiateArrayBuffer(receiveInstantiatedSource);
});
});
} else {
return instantiateArrayBuffer(receiveInstantiatedSource);
}
}
// User shell pages can write their own Module.instantiateWasm = function(imports, successCallback) callback
// to manually instantiate the Wasm module themselves. This allows pages to run the instantiation parallel
// to any other async startup actions they are performing.
if (Module['instantiateWasm']) {
try {
return Module['instantiateWasm'](info, receiveInstance);
} catch(e) {
//err('Module.instantiateWasm callback failed with error: ' + e);
return false;
}
}
instantiateAsync();
return {}; // no exports yet; we'll fill them in later
}
// Provide an "asm.js function" for the application, called to "link" the asm.js module. We instantiate
// the wasm module at that time, and it receives imports and provides exports and so forth, the app
// doesn't need to care that it is wasm or asm.js.
Module['asm'] = function(global, env, providedBuffer) {
// memory was already allocated (so js could use the buffer)
env['memory'] = wasmMemory
;
// import table
env['table'] = wasmTable = new WebAssembly.Table({
'initial': 22,
'maximum': 22,
'element': 'anyfunc'
});
// With the wasm backend __memory_base and __table_base and only needed for
// relocatable output.
env['__memory_base'] = 1024; // tell the memory segments where to place themselves
// table starts at 0 by default (even in dynamic linking, for the main module)
env['__table_base'] = 0;
var exports = createWasm(env);
assert(exports, 'binaryen setup failed (no wasm support?)');
return exports;
};
// STATICTOP = STATIC_BASE + 14080;
/* global initializers */ /*__ATINIT__.push();*/
/* no memory initializer */
var tempDoublePtr = 15088;
assert(tempDoublePtr % 8 == 0);
// {{PRE_LIBRARY}}
function ___lock() {}
var SYSCALLS={buffers:[null,[],[]],printChar:function (stream, curr) {
var buffer = SYSCALLS.buffers[stream];
assert(buffer);
if (curr === 0 || curr === 10) {
(stream === 1 ? out : err)(UTF8ArrayToString(buffer, 0));
buffer.length = 0;
} else {
buffer.push(curr);
}
},varargs:0,get:function (varargs) {
SYSCALLS.varargs += 4;
var ret = HEAP32[(((SYSCALLS.varargs)-(4))>>2)];
return ret;
},getStr:function () {
var ret = UTF8ToString(SYSCALLS.get());
return ret;
},get64:function () {
var low = SYSCALLS.get(), high = SYSCALLS.get();
if (low >= 0) assert(high === 0);
else assert(high === -1);
return low;
},getZero:function () {
assert(SYSCALLS.get() === 0);
}};function ___syscall140(which, varargs) {SYSCALLS.varargs = varargs;
try {
// llseek
var stream = SYSCALLS.getStreamFromFD(), offset_high = SYSCALLS.get(), offset_low = SYSCALLS.get(), result = SYSCALLS.get(), whence = SYSCALLS.get();
abort('it should not be possible to operate on streams when !SYSCALLS_REQUIRE_FILESYSTEM');
return 0;
} catch (e) {
if (typeof FS === 'undefined' || !(e instanceof FS.ErrnoError)) abort(e);
return -e.errno;
}
}
function flush_NO_FILESYSTEM() {
// flush anything remaining in the buffers during shutdown
var fflush = Module["_fflush"];
if (fflush) fflush(0);
var buffers = SYSCALLS.buffers;
if (buffers[1].length) SYSCALLS.printChar(1, 10);
if (buffers[2].length) SYSCALLS.printChar(2, 10);
}function ___syscall146(which, varargs) {SYSCALLS.varargs = varargs;
try {
// writev
// hack to support printf in SYSCALLS_REQUIRE_FILESYSTEM=0
var stream = SYSCALLS.get(), iov = SYSCALLS.get(), iovcnt = SYSCALLS.get();
var ret = 0;
for (var i = 0; i < iovcnt; i++) {
var ptr = HEAP32[(((iov)+(i*8))>>2)];
var len = HEAP32[(((iov)+(i*8 + 4))>>2)];
for (var j = 0; j < len; j++) {
SYSCALLS.printChar(stream, HEAPU8[ptr+j]);
}
ret += len;
}
return ret;
} catch (e) {
if (typeof FS === 'undefined' || !(e instanceof FS.ErrnoError)) abort(e);
return -e.errno;
}
}
function ___syscall54(which, varargs) {SYSCALLS.varargs = varargs;
try {
// ioctl
return 0;
} catch (e) {
if (typeof FS === 'undefined' || !(e instanceof FS.ErrnoError)) abort(e);
return -e.errno;
}
}
function ___syscall6(which, varargs) {SYSCALLS.varargs = varargs;
try {
// close
var stream = SYSCALLS.getStreamFromFD();
abort('it should not be possible to operate on streams when !SYSCALLS_REQUIRE_FILESYSTEM');
return 0;
} catch (e) {
if (typeof FS === 'undefined' || !(e instanceof FS.ErrnoError)) abort(e);
return -e.errno;
}
}
function ___unlock() {}
function _emscripten_get_heap_size() {
return HEAP8.length;
}
function _emscripten_memcpy_big(dest, src, num) {
HEAPU8.set(HEAPU8.subarray(src, src+num), dest);
}
function ___setErrNo(value) {
if (Module['___errno_location']) HEAP32[((Module['___errno_location']())>>2)]=value;
else err('failed to set errno from JS');
return value;
}
function abortOnCannotGrowMemory(requestedSize) {
abort('Cannot enlarge memory arrays to size ' + requestedSize + ' bytes (OOM). Either (1) compile with -s TOTAL_MEMORY=X with X higher than the current value ' + HEAP8.length + ', (2) compile with -s ALLOW_MEMORY_GROWTH=1 which allows increasing the size at runtime, or (3) if you want malloc to return NULL (0) instead of this abort, compile with -s ABORTING_MALLOC=0 ');
}
function emscripten_realloc_buffer(size) {
var PAGE_MULTIPLE = 65536;
size = alignUp(size, PAGE_MULTIPLE); // round up to wasm page size
var oldSize = buffer.byteLength;
// native wasm support
// note that this is *not* threadsafe. multiple threads can call .grow(), and each
// presents a delta, so in theory we may over-allocate here (e.g. if two threads
// ask to grow from 256MB to 512MB, we get 2 requests to add +256MB, and may end
// up growing to 768MB (even though we may have been able to make do with 512MB).
// TODO: consider decreasing the step sizes in emscripten_resize_heap
try {
var result = wasmMemory.grow((size - oldSize) / 65536); // .grow() takes a delta compared to the previous size
if (result !== (-1 | 0)) {
// success in native wasm memory growth, get the buffer from the memory
buffer = wasmMemory.buffer;
return true;
} else {
return false;
}
} catch(e) {
console.error('emscripten_realloc_buffer: Attempted to grow from ' + oldSize + ' bytes to ' + size + ' bytes, but got error: ' + e);
return false;
}
}function _emscripten_resize_heap(requestedSize) {
var oldSize = _emscripten_get_heap_size();
// With pthreads, races can happen (another thread might increase the size in between), so return a failure, and let the caller retry.
assert(requestedSize > oldSize);
var PAGE_MULTIPLE = 65536;
var LIMIT = 2147483648 - PAGE_MULTIPLE; // We can do one page short of 2GB as theoretical maximum.
if (requestedSize > LIMIT) {
err('Cannot enlarge memory, asked to go up to ' + requestedSize + ' bytes, but the limit is ' + LIMIT + ' bytes!');
return false;
}
var MIN_TOTAL_MEMORY = 16777216;
var newSize = Math.max(oldSize, MIN_TOTAL_MEMORY); // So the loop below will not be infinite, and minimum asm.js memory size is 16MB.
// TODO: see realloc_buffer - for PTHREADS we may want to decrease these jumps
while (newSize < requestedSize) { // Keep incrementing the heap size as long as it's less than what is requested.
if (newSize <= 536870912) {
newSize = alignUp(2 * newSize, PAGE_MULTIPLE); // Simple heuristic: double until 1GB...
} else {
// ..., but after that, add smaller increments towards 2GB, which we cannot reach
newSize = Math.min(alignUp((3 * newSize + 2147483648) / 4, PAGE_MULTIPLE), LIMIT);
}
if (newSize === oldSize) {
warnOnce('Cannot ask for more memory since we reached the practical limit in browsers (which is just below 2GB), so the request would have failed. Requesting only ' + HEAP8.length);
}
}
if (!emscripten_realloc_buffer(newSize)) {
err('Failed to grow the heap from ' + oldSize + ' bytes to ' + newSize + ' bytes, not enough memory!');
return false;
}
updateGlobalBufferViews();
return true;
}
// ASM_LIBRARY EXTERN PRIMITIVES: Int8Array,Int32Array
function nullFunc_ii(x) { err("Invalid function pointer called with signature 'ii'. Perhaps this is an invalid value (e.g. caused by calling a virtual method on a NULL pointer)? Or calling a function with an incorrect type, which will fail? (it is worth building your source files with -Werror (warnings are errors), as warnings can indicate undefined behavior which can cause this)"); err("Build with ASSERTIONS=2 for more info.");abort(x); }
function nullFunc_iiii(x) { err("Invalid function pointer called with signature 'iiii'. Perhaps this is an invalid value (e.g. caused by calling a virtual method on a NULL pointer)? Or calling a function with an incorrect type, which will fail? (it is worth building your source files with -Werror (warnings are errors), as warnings can indicate undefined behavior which can cause this)"); err("Build with ASSERTIONS=2 for more info.");abort(x); }
function nullFunc_jiji(x) { err("Invalid function pointer called with signature 'jiji'. Perhaps this is an invalid value (e.g. caused by calling a virtual method on a NULL pointer)? Or calling a function with an incorrect type, which will fail? (it is worth building your source files with -Werror (warnings are errors), as warnings can indicate undefined behavior which can cause this)"); err("Build with ASSERTIONS=2 for more info.");abort(x); }
function nullFunc_vii(x) { err("Invalid function pointer called with signature 'vii'. Perhaps this is an invalid value (e.g. caused by calling a virtual method on a NULL pointer)? Or calling a function with an incorrect type, which will fail? (it is worth building your source files with -Werror (warnings are errors), as warnings can indicate undefined behavior which can cause this)"); err("Build with ASSERTIONS=2 for more info.");abort(x); }
var asmGlobalArg = {};
var asmLibraryArg = {
"abort": abort,
"setTempRet0": setTempRet0,
"getTempRet0": getTempRet0,
"abortStackOverflow": abortStackOverflow,
"nullFunc_ii": nullFunc_ii,
"nullFunc_iiii": nullFunc_iiii,
"nullFunc_jiji": nullFunc_jiji,
"nullFunc_vii": nullFunc_vii,
"___lock": ___lock,
"___setErrNo": ___setErrNo,
"___syscall140": ___syscall140,
"___syscall146": ___syscall146,
"___syscall54": ___syscall54,
"___syscall6": ___syscall6,
"___unlock": ___unlock,
"_emscripten_get_heap_size": _emscripten_get_heap_size,
"_emscripten_memcpy_big": _emscripten_memcpy_big,
"_emscripten_resize_heap": _emscripten_resize_heap,
"abortOnCannotGrowMemory": abortOnCannotGrowMemory,
"emscripten_realloc_buffer": emscripten_realloc_buffer,
"flush_NO_FILESYSTEM": flush_NO_FILESYSTEM,
"tempDoublePtr": tempDoublePtr,
"DYNAMICTOP_PTR": DYNAMICTOP_PTR
};
// EMSCRIPTEN_START_ASM
var asm =Module["asm"]// EMSCRIPTEN_END_ASM
(asmGlobalArg, asmLibraryArg, buffer);
var real____errno_location = asm["___errno_location"];
asm["___errno_location"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return real____errno_location.apply(null, arguments);
};
var real__fflush = asm["_fflush"];
asm["_fflush"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return real__fflush.apply(null, arguments);
};
var real__free = asm["_free"];
asm["_free"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return real__free.apply(null, arguments);
};
var real__freePointer = asm["_freePointer"];
asm["_freePointer"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return real__freePointer.apply(null, arguments);
};
var real__llvm_bswap_i32 = asm["_llvm_bswap_i32"];
asm["_llvm_bswap_i32"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return real__llvm_bswap_i32.apply(null, arguments);
};
var real__malloc = asm["_malloc"];
asm["_malloc"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return real__malloc.apply(null, arguments);
};
var real__sbrk = asm["_sbrk"];
asm["_sbrk"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return real__sbrk.apply(null, arguments);
};
var real__unzip = asm["_unzip"];
asm["_unzip"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return real__unzip.apply(null, arguments);
};
var real_establishStackSpace = asm["establishStackSpace"];
asm["establishStackSpace"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return real_establishStackSpace.apply(null, arguments);
};
var real_stackAlloc = asm["stackAlloc"];
asm["stackAlloc"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return real_stackAlloc.apply(null, arguments);
};
var real_stackRestore = asm["stackRestore"];
asm["stackRestore"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return real_stackRestore.apply(null, arguments);
};
var real_stackSave = asm["stackSave"];
asm["stackSave"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return real_stackSave.apply(null, arguments);
};
Module["asm"] = asm;
var ___errno_location = Module["___errno_location"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["___errno_location"].apply(null, arguments)
};
var _emscripten_replace_memory = Module["_emscripten_replace_memory"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["_emscripten_replace_memory"].apply(null, arguments)
};
var _fflush = Module["_fflush"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["_fflush"].apply(null, arguments)
};
var _free = Module["_free"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["_free"].apply(null, arguments)
};
var _freePointer = Module["_freePointer"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["_freePointer"].apply(null, arguments)
};
var _llvm_bswap_i32 = Module["_llvm_bswap_i32"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["_llvm_bswap_i32"].apply(null, arguments)
};
var _malloc = Module["_malloc"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["_malloc"].apply(null, arguments)
};
var _memcpy = Module["_memcpy"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["_memcpy"].apply(null, arguments)
};
var _memset = Module["_memset"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["_memset"].apply(null, arguments)
};
var _sbrk = Module["_sbrk"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["_sbrk"].apply(null, arguments)
};
var _unzip = Module["_unzip"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["_unzip"].apply(null, arguments)
};
var establishStackSpace = Module["establishStackSpace"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["establishStackSpace"].apply(null, arguments)
};
var stackAlloc = Module["stackAlloc"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["stackAlloc"].apply(null, arguments)
};
var stackRestore = Module["stackRestore"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["stackRestore"].apply(null, arguments)
};
var stackSave = Module["stackSave"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["stackSave"].apply(null, arguments)
};
var dynCall_ii = Module["dynCall_ii"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["dynCall_ii"].apply(null, arguments)
};
var dynCall_iiii = Module["dynCall_iiii"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["dynCall_iiii"].apply(null, arguments)
};
var dynCall_jiji = Module["dynCall_jiji"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["dynCall_jiji"].apply(null, arguments)
};
var dynCall_vii = Module["dynCall_vii"] = function() {
assert(runtimeInitialized, 'you need to wait for the runtime to be ready (e.g. wait for main() to be called)');
assert(!runtimeExited, 'the runtime was exited (use NO_EXIT_RUNTIME to keep it alive after main() exits)');
return Module["asm"]["dynCall_vii"].apply(null, arguments)
};
// === Auto-generated postamble setup entry stuff ===
Module['asm'] = asm;
if (!Module["intArrayFromString"]) Module["intArrayFromString"] = function() { abort("'intArrayFromString' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["intArrayToString"]) Module["intArrayToString"] = function() { abort("'intArrayToString' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
Module["ccall"] = ccall;
Module["cwrap"] = cwrap;
if (!Module["setValue"]) Module["setValue"] = function() { abort("'setValue' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
Module["getValue"] = getValue;
if (!Module["allocate"]) Module["allocate"] = function() { abort("'allocate' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["getMemory"]) Module["getMemory"] = function() { abort("'getMemory' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ). Alternatively, forcing filesystem support (-s FORCE_FILESYSTEM=1) can export this for you"); };
if (!Module["AsciiToString"]) Module["AsciiToString"] = function() { abort("'AsciiToString' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["stringToAscii"]) Module["stringToAscii"] = function() { abort("'stringToAscii' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["UTF8ArrayToString"]) Module["UTF8ArrayToString"] = function() { abort("'UTF8ArrayToString' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["UTF8ToString"]) Module["UTF8ToString"] = function() { abort("'UTF8ToString' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["stringToUTF8Array"]) Module["stringToUTF8Array"] = function() { abort("'stringToUTF8Array' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["stringToUTF8"]) Module["stringToUTF8"] = function() { abort("'stringToUTF8' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["lengthBytesUTF8"]) Module["lengthBytesUTF8"] = function() { abort("'lengthBytesUTF8' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["UTF16ToString"]) Module["UTF16ToString"] = function() { abort("'UTF16ToString' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["stringToUTF16"]) Module["stringToUTF16"] = function() { abort("'stringToUTF16' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["lengthBytesUTF16"]) Module["lengthBytesUTF16"] = function() { abort("'lengthBytesUTF16' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["UTF32ToString"]) Module["UTF32ToString"] = function() { abort("'UTF32ToString' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["stringToUTF32"]) Module["stringToUTF32"] = function() { abort("'stringToUTF32' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["lengthBytesUTF32"]) Module["lengthBytesUTF32"] = function() { abort("'lengthBytesUTF32' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["allocateUTF8"]) Module["allocateUTF8"] = function() { abort("'allocateUTF8' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["stackTrace"]) Module["stackTrace"] = function() { abort("'stackTrace' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["addOnPreRun"]) Module["addOnPreRun"] = function() { abort("'addOnPreRun' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["addOnInit"]) Module["addOnInit"] = function() { abort("'addOnInit' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["addOnPreMain"]) Module["addOnPreMain"] = function() { abort("'addOnPreMain' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["addOnExit"]) Module["addOnExit"] = function() { abort("'addOnExit' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["addOnPostRun"]) Module["addOnPostRun"] = function() { abort("'addOnPostRun' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["writeStringToMemory"]) Module["writeStringToMemory"] = function() { abort("'writeStringToMemory' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["writeArrayToMemory"]) Module["writeArrayToMemory"] = function() { abort("'writeArrayToMemory' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["writeAsciiToMemory"]) Module["writeAsciiToMemory"] = function() { abort("'writeAsciiToMemory' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["addRunDependency"]) Module["addRunDependency"] = function() { abort("'addRunDependency' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ). Alternatively, forcing filesystem support (-s FORCE_FILESYSTEM=1) can export this for you"); };
if (!Module["removeRunDependency"]) Module["removeRunDependency"] = function() { abort("'removeRunDependency' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ). Alternatively, forcing filesystem support (-s FORCE_FILESYSTEM=1) can export this for you"); };
if (!Module["ENV"]) Module["ENV"] = function() { abort("'ENV' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["FS"]) Module["FS"] = function() { abort("'FS' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["FS_createFolder"]) Module["FS_createFolder"] = function() { abort("'FS_createFolder' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ). Alternatively, forcing filesystem support (-s FORCE_FILESYSTEM=1) can export this for you"); };
if (!Module["FS_createPath"]) Module["FS_createPath"] = function() { abort("'FS_createPath' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ). Alternatively, forcing filesystem support (-s FORCE_FILESYSTEM=1) can export this for you"); };
if (!Module["FS_createDataFile"]) Module["FS_createDataFile"] = function() { abort("'FS_createDataFile' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ). Alternatively, forcing filesystem support (-s FORCE_FILESYSTEM=1) can export this for you"); };
if (!Module["FS_createPreloadedFile"]) Module["FS_createPreloadedFile"] = function() { abort("'FS_createPreloadedFile' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ). Alternatively, forcing filesystem support (-s FORCE_FILESYSTEM=1) can export this for you"); };
if (!Module["FS_createLazyFile"]) Module["FS_createLazyFile"] = function() { abort("'FS_createLazyFile' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ). Alternatively, forcing filesystem support (-s FORCE_FILESYSTEM=1) can export this for you"); };
if (!Module["FS_createLink"]) Module["FS_createLink"] = function() { abort("'FS_createLink' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ). Alternatively, forcing filesystem support (-s FORCE_FILESYSTEM=1) can export this for you"); };
if (!Module["FS_createDevice"]) Module["FS_createDevice"] = function() { abort("'FS_createDevice' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ). Alternatively, forcing filesystem support (-s FORCE_FILESYSTEM=1) can export this for you"); };
if (!Module["FS_unlink"]) Module["FS_unlink"] = function() { abort("'FS_unlink' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ). Alternatively, forcing filesystem support (-s FORCE_FILESYSTEM=1) can export this for you"); };
if (!Module["GL"]) Module["GL"] = function() { abort("'GL' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["dynamicAlloc"]) Module["dynamicAlloc"] = function() { abort("'dynamicAlloc' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["warnOnce"]) Module["warnOnce"] = function() { abort("'warnOnce' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["loadDynamicLibrary"]) Module["loadDynamicLibrary"] = function() { abort("'loadDynamicLibrary' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["loadWebAssemblyModule"]) Module["loadWebAssemblyModule"] = function() { abort("'loadWebAssemblyModule' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["getLEB"]) Module["getLEB"] = function() { abort("'getLEB' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["getFunctionTables"]) Module["getFunctionTables"] = function() { abort("'getFunctionTables' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["alignFunctionTables"]) Module["alignFunctionTables"] = function() { abort("'alignFunctionTables' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["registerFunctions"]) Module["registerFunctions"] = function() { abort("'registerFunctions' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["addFunction"]) Module["addFunction"] = function() { abort("'addFunction' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["removeFunction"]) Module["removeFunction"] = function() { abort("'removeFunction' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["getFuncWrapper"]) Module["getFuncWrapper"] = function() { abort("'getFuncWrapper' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["prettyPrint"]) Module["prettyPrint"] = function() { abort("'prettyPrint' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["makeBigInt"]) Module["makeBigInt"] = function() { abort("'makeBigInt' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["dynCall"]) Module["dynCall"] = function() { abort("'dynCall' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["getCompilerSetting"]) Module["getCompilerSetting"] = function() { abort("'getCompilerSetting' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["stackSave"]) Module["stackSave"] = function() { abort("'stackSave' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["stackRestore"]) Module["stackRestore"] = function() { abort("'stackRestore' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["stackAlloc"]) Module["stackAlloc"] = function() { abort("'stackAlloc' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["establishStackSpace"]) Module["establishStackSpace"] = function() { abort("'establishStackSpace' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["print"]) Module["print"] = function() { abort("'print' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["printErr"]) Module["printErr"] = function() { abort("'printErr' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["getTempRet0"]) Module["getTempRet0"] = function() { abort("'getTempRet0' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["setTempRet0"]) Module["setTempRet0"] = function() { abort("'setTempRet0' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };
if (!Module["Pointer_stringify"]) Module["Pointer_stringify"] = function() { abort("'Pointer_stringify' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); };if (!Module["ALLOC_NORMAL"]) Object.defineProperty(Module, "ALLOC_NORMAL", { get: function() { abort("'ALLOC_NORMAL' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); } });
if (!Module["ALLOC_STACK"]) Object.defineProperty(Module, "ALLOC_STACK", { get: function() { abort("'ALLOC_STACK' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); } });
if (!Module["ALLOC_DYNAMIC"]) Object.defineProperty(Module, "ALLOC_DYNAMIC", { get: function() { abort("'ALLOC_DYNAMIC' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); } });
if (!Module["ALLOC_NONE"]) Object.defineProperty(Module, "ALLOC_NONE", { get: function() { abort("'ALLOC_NONE' was not exported. add it to EXTRA_EXPORTED_RUNTIME_METHODS (see the FAQ)"); } });
/**
* @constructor
* @extends {Error}
* @this {ExitStatus}
*/
function ExitStatus(status) {
this.name = "ExitStatus";
this.message = "Program terminated with exit(" + status + ")";
this.status = status;
} ExitStatus.prototype = new Error();
ExitStatus.prototype.constructor = ExitStatus;
dependenciesFulfilled = function runCaller() {
// If run has never been called, and we should call run (INVOKE_RUN is true, and Module.noInitialRun is not false)
if (!Module['calledRun']) run();
if (!Module['calledRun']) dependenciesFulfilled = runCaller; // try this again later, after new deps are fulfilled
};
/** @type {function(Array=)} */
function run(args) {
args = args || Module['arguments'];
if (runDependencies > 0) {
return;
}
writeStackCookie();
preRun();
if (runDependencies > 0) return; // a preRun added a dependency, run will be called later
if (Module['calledRun']) return; // run may have just been called through dependencies being fulfilled just in this very frame
function doRun() {
if (Module['calledRun']) return; // run may have just been called while the async setStatus time below was happening
Module['calledRun'] = true;
if (ABORT) return;
ensureInitRuntime();
preMain();
if (Module['onRuntimeInitialized']) Module['onRuntimeInitialized']();
assert(!Module['_main'], 'compiled without a main, but one is present. if you added it from JS, use Module["onRuntimeInitialized"]');
postRun();
}
if (Module['setStatus']) {
Module['setStatus']('Running...');
setTimeout(function() {
setTimeout(function() {
Module['setStatus']('');
}, 1);
doRun();
}, 1);
} else {
doRun();
}
checkStackCookie();
}
Module['run'] = run;
var abortDecorators = [];
function abort(what) {
if (Module['onAbort']) {
Module['onAbort'](what);
}
if (what !== undefined) {
//out(what);
//err(what);
what = '"' + what + '"';
} else {
what = '';
}
ABORT = true;
var extra = '';
var output = 'abort(' + what + ') at ' + stackTrace() + extra;
if (abortDecorators) {
abortDecorators.forEach(function(decorator) {
output = decorator(output, what);
});
}
throw output;
}
Module['abort'] = abort;
if (Module['preInit']) {
if (typeof Module['preInit'] == 'function') Module['preInit'] = [Module['preInit']];
while (Module['preInit'].length > 0) {
Module['preInit'].pop()();
}
}
Module["noExitRuntime"] = true;
run();
} else {
var Module = null;
}
var unzip = Module;
// {{MODULE_ADDITIONS}}
exports.unzip = unzip;
});
